Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mount Washington, CA
Gate installation in Mount Washington usually runs $3,800 to $14,000 depending on whether we’re fitting a new automatic driveway gate on a steep hillside lot or replacing an existing gate mounted to a retaining wall. Most jobs here take one to three days because the terrain rarely gives us a flat, level pad to work from. Lighthouse Gate Repair has served Mount Washington since 2018, and we work on your brand whether it’s LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule. Call (866) 569-5320 for a free estimate.
Why Mount Washington Homes Are Different
Mount Washington’s hillside lots, narrow winding streets, and self-built mid-century character mean gates here are often custom-fabricated on steep driveways and retaining walls, where the gate shares a footing with the hillside itself. That changes how we approach almost every job. A sagging gate in Mount Washington is frequently a soil-movement or retrofit problem, not just a hinge issue. The original post was set into a cut-and-fill slope forty or sixty years ago, and the ground has been slowly moving ever since.
The housing stock is predominantly 1940s through 1960s custom and self-built hillside homes, many on pier-and-beam or cut-and-fill foundations with irregular lot lines. Gates are mounted to retaining walls rather than flat driveway approaches. The climate works against those installations too. Steep, dry, fire-prone slopes above the Arroyo Seco and periodic heavy rains create seasonal soil creep and settling that rack gate posts out of plumb. Sun-baked wood fences and gates warp and dry-crack between wet and dry seasons. In Mount Washington, the gate at the top of the private hillside driveway often doubles as the property line and the retaining-wall cap. After a rainy season, posts lean downhill in the direction of the slope, not just at the hinges. That is the single most common call we get from the 90065 ZIP.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Mount Washington Services
Most Mount Washington homeowners and property managers call us for one of two reasons: a gate that has stopped working entirely, or an electric gate system that has developed a mind of its own. Both start with a diagnosis, never a parts quote.
Gate Repair in Mount Washington
When a gate on a Mount Washington hillside stops opening, the cause is rarely just one component. It is usually a combination of a post that has moved with the slope, a hinge that has been holding more weight than it should, and a latch or track that no longer lines up. We diagnose the whole assembly as one system. From your driveway opener to your commercial access system, we get it back in working order and correct the underlying mount so the same failure does not return after the next rainy season. For the full scope of gate repair in Mount Washington, see Gate Repair in Mount Washington.
Electric Gate Repair in Mount Washington
Electric gate systems in Mount Washington run into trouble when a control board gets fried by a power surge, a safety sensor gets knocked out of alignment, or a motor burns out after years of fighting a gate that the slope has slowly pulled against. Wiring, control boards, safety sensors, and motor diagnostics are core work for us, not an add-on. We service the gate you have rather than pushing a replacement with a preferred brand. For the full electric gate picture, see Electric Gate Repair in Mount Washington.
Gate Installation in Mount Washington
Gate installation in Mount Washington means working with steep driveways, retaining-wall mounts, and homes built between the 1940s and 1960s that were never designed for a modern automatic opener. We dig into the slope, pour or retrofit footings that hold up to seasonal soil creep, and build a gate that clears the grade change properly. Whether you are replacing a tired custom gate or adding an electric system for the first time, we handle the full project from first measure to final safety check. Our Gate Installation service covers residential driveway gates through light commercial access points.
Automatic Gate Installation
Signs you need it
You are manually hauling a heavy gate open every day, or you have an opener that no longer keeps up with the gate’s weight.
What it costs in Mount Washington
An automatic gate installation with opener, controls, and safety sensors typically runs $4,500 to $12,000 in Mount Washington depending on slope, gate weight, and access control needs.
How we do it
We measure the grade and gate weight, set or retrofit the posts and footings, mount the opener and arm, wire the control loop and safety edges, then program and test the full travel cycle before we call the job done.
Driveway Gate Installation
Signs you need it
Your existing gate is leaning, dragging, or no longer closes fully, and repairs would cost more than a properly built replacement.
What it costs in Mount Washington
A new driveway gate, post-and-hinge assembly included, typically runs $3,800 to $9,500 in Mount Washington before any opener or automation is added.
How we do it
We set posts in concrete at a depth that works with the local slope, build or hang the gate to follow the driveway grade, and align hinges so the gate swings true from day one.
Electric Gate Installation
Signs you need it
You have a manual gate but want keypad, intercom, or remote access, or your property needs a safer automated entry point.
What it costs in Mount Washington
Electric gate installation with motor, control board, and safety sensors typically runs $5,000 to $14,000 in Mount Washington depending on access control complexity and power-run distance.
How we do it
We run the power and low-voltage wiring, mount the motor and control board, install safety photo eyes and edges, wire the access device, and test every safety function before turning the system over to you.
Sliding Gate Installation
Signs you need it
Your driveway is too steep or too short for a swing gate, or you want to save driveway space on a narrow Mount Washington lot.
What it costs in Mount Washington
A sliding gate installation typically runs $5,500 to $13,000 in Mount Washington when you include the track, motor, and cantilever or roller hardware.
How we do it
We build and level the track or set the cantilever posts, hang the gate panel, mount the drive motor, and align the safety sensors along the full slide path.
What Gate Installation Costs in Mount Washington
| Item | Typical range in Mount Washington |
|---|---|
| Driveway gate and posts, no automation | $3,800 – $9,500 |
| Automatic gate with opener and sensors | $4,500 – $12,000 |
| Electric gate with access control | $5,000 – $14,000 |
How long does gate installation take in Mount Washington?
Most gate installations in Mount Washington take one to three days. Sloped lots with retaining-wall mounts or long power runs can add a day. We quote a schedule before work starts and stick to it.
Can you install a gate on a steep Mount Washington driveway?
Yes. Steep driveways are the majority of our Mount Washington work. We set footings to handle the grade and the seasonal soil movement, and we choose hinge and opener combinations rated for the slope. Call (866) 569-5320 for a free measure.
Brands We Service in Mount Washington
We work on FAAC hydraulic and electromechanical systems, BFT control boards and arms, Linear openers, and Viking heavy-duty operators. We stock common control boards, photo eyes, and arm components locally, so turnaround on a Mount Washington repair is usually same day or next morning. See our brands for the full list we cover.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mount Washington, CA
| Service | Typical range in Mount Washington |
|---|---|
| Gate repair, minor hinge and alignment work | $180 – $450 |
| Gate repair, post reset in hillside soil | $500 – $1,400 |
| Electric gate troubleshooting and diagnosis | $150 – $400 |
| Electric gate circuit board replacement | $450 – $1,600 |
| Electric gate motor replacement | $800 – $2,800 |
| Driveway gate and posts, no automation | $3,800 – $9,500 |
| Automatic gate with opener and sensors | $4,500 – $12,000 |
| Electric gate with access control | $5,000 – $14,000 |
| Sliding gate installation | $5,500 – $13,000 |
What pushes price up in Mount Washington is almost always the terrain: a steep grade, a retaining wall that has to be rebuilt, or a long power run from the house to a gate at the bottom of a hillside. Whatever the job, we quote the full price before any work starts, and that number does not move unless the scope changes and you approve it first.
Neighborhoods We Serve in Mount Washington
We serve the full 90065 ZIP and the streets that wind up from the Arroyo Seco. Response time across Mount Washington is typically 2 to 4 hours for a diagnosed repair call, and we schedule installations within the week in most cases.
- Mount Washington Summit
- Quail Drive area
- Cleland Avenue hillsides
- Figueroa Street corridor
- San Rafael Avenue district
Service Area – Cities Near Mount Washington
We run out of Montecito Heights, so Mount Washington is right in our back yard. The same team also covers Glassell Park, CA, Chinatown, CA, Montecito Heights, CA, and Downtown Los Angeles, CA for gate repair, electric gate repair, and full gate installation.
Serving Mount Washington, CA – Our Local Coverage Area
We’re based in the Mount Washington area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mount Washington
For a gate that will not open or will not close, we typically arrive within 2 to 4 hours anywhere in Mount Washington. Emergency calls get priority because a stuck-open gate on a hillside driveway is a real security problem. Call (866) 569-5320 and we will tell you straight when a technician can be there.
Most gate replacements on existing posts do not need a permit, but new footings, retaining-wall work, or an electrical power run sometimes do. We check the Los Angeles municipal requirements for your exact location before we dig, and we tell you what applies on our first visit.
If your Mount Washington street has an HOA or a shared access agreement, we work from their approved gate and color standards. Bring us the HOA packet and we will build the quote around what is actually approved, so you are not going back for a second round of sign-offs.
For gate installation, gate repair, or electric gate repair in Mount Washington, call Lighthouse Gate Repair at (866) 569-5320. We diagnose first, quote the full price before work starts, and get your gate back in working order.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Mount Washington Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Alejandro Morales"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Lucia Hernandez"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Maya Rao